Accessibility

Table of Contents

  1. Introduction
  2. Pre-installation
  3. Installation
  4. Post-installation
  5. Using the "Run As" Command

Configuring ColdFusion MX 7 Server Security

Pre-installation

Network Layer Security

Network security vulnerabilities are among the first threats to any Internet- or intranet-facing application server. This section deals with the process of hardening hosts on the network against these vulnerabilities. It addresses network segmentation, TCP/IP stack hardening, and the use of firewalls for host protection.

Recommendation
Standard Place ColdFusion servers within a demilitarized zone (DMZ).
Description Segmentation should exist in at least two levels for web servers. Separate the external network from the DMZ that contains the web servers, which in turn must be separated from the internal network. Use firewalls to implement the layers of separation. Categorize and control the traffic that passes through each network layer to ensure that only the absolute minimum of required data is allowed.
Standard Use Network Address Translation (NAT) with RFC 1918 private IP addresses on ColdFusion application servers.
Description Assign private IP addresses (10.0.0.0/8, 172.16.0.0/12, or 192.168.0.0/16) to make it more difficult for an attacker to route traffic to and from a NAT'd internal host through the Internet.
Standard Use a firewall to protect exposed network perimeters.
Description

Use the following criteria to select a firewall solution:

  • Implement firewalls that support proxy servers and/or "stateful inspection," rather than simple packet-filtering solutions.
  • Use a firewall that supports a "deny all services except those explicitly permitted" security paradigm.
  • Implement a firewall solution that is dual-homed or multihomed. This architecture provides the greatest level of security and helps to prevent unauthorized users from bypassing the security of the firewall.
Standard Do not use default listening ports for databases (Oracle – 1521, MS SQL – 1433)
Description See the database documentation.

Operating System Security

By configuring many of the Windows 2003 systemwide settings through the Group Policy Objects, you do not have to configure Registry settings manually for servers on the same domain. However, you should install web servers as stand-alone servers, not as members of the organization's domain. Using stand-alone servers potentially limits the scope of a security breach to a single computer. To apply policy changes to multiple servers, use either scripts or a DMZ-only domain.

Recommendation
Standard Install only necessary IIS services.
Description

Service vulnerabilities are used by attackers to compromise systems. The more services that are installed on the server, the more vulnerabilities that may be exploited.

IIS has the option to install WWW Service, IIS Admin, FTP, NNTP, and SMTP. FTP and NNTP should not be installed on a dedicated ColdFusion server. Also, if no application needs the ability to send and receive e-mail locally, SMTP should not be installed.
Standard Install all necessary security patches in Windows 2003.
Description

There is an increased risk that an unauthorized user may gain access to the application server if vendor security patches and upgrades are not applied in a timely fashion. Test patches before applying them to production servers.

Create policy and procedures to check for and install patches on a regular basis.
Standard Apply the High Security Member Server Baseline Policy (MBSP).
Description

Download the Windows Server 2003 Security Guide. The guide includes three policy templates; one is the High Security template. Apply only the High Security template to the IIS server prior to installing ColdFusion.

After applying the template, you must modify the following settings to allow IIS to run properly:

Under User Rights Assignments:

  • To allow anonymous users to connect to IIS, remove the Guests group from the "Deny access to this computer from the network" policy. The IUSR account is a member of the Guests group.

Under System Services:

  • Set HTTP SSL service to Automatic. The HTTP SSL service enables IIS to perform Secure Sockets Layer (SSL) functions.
  • Set IIS Admin Service to Automatic. The IIS Admin Service allows administration of IIS components such as File Transfer Protocol (FTP), Application Pools, websites, web service extensions, and Network News Transfer Protocol (NNTP) and Simple Mail Transfer Protocol (SMTP) virtual servers.
  • Set World Wide Web Publishing Service to Automatic. The World Wide Web Publishing Service provides network connectivity and administration of websites.
Standard Change or remove the web server banner.
Description

Modifying the IIS banner has some potential benefits if automated attack scripts that launch exploits against a server are based on the banner. Changing the banner obscures the kind of web server that the attacker is connected to.

To remove the banner, set the following Registry key:

HLM\SYSTEM\CurrentControlSet\Services\HTTP\Parameters\DisableServerHeader to 1
Standard Place IIS content on a dedicated NTFS disk partition.
Description Disk segmentation is a process of keeping specific data on your server on separate physical disks for added security. Arranging data in this way reduces the risk of directory traversal attacks. Move the IIS inetpub or wwwroot directory to a partition different from the system (contains system32 directory) or boot partition.
Standard Install and configure virus protection software.
Description Virus scanners can identify infected files by scanning for a signature or watching for anomalous behavior. Scanners keep their virus signatures in a file, which is usually stored on the local hard drive. Because new viruses are discovered often, you should frequently update this file for the virus scanner to identify all current viruses.
Standard Use Network Time Protocol (NTP) in a secure fashion.
Description

For forensic analysis, keep accurate time on ColdFusion servers. Use NTP to synchronize the time on all systems that are connected directly to the Internet. Figure 1 shows how to configure Internet time in Windows Server 2003 to time.nist.gov.

Configuring Internet time in Windows Server 2003

Figure 1. Configuring Internet time in Windows Server 2003
Page 2 of 5
Previous Page
Next Page