Accessibility

Support Knowledgebase

Optimize native and PDF file sizes (Illustrator CS, CS2)

What's covered

Saving Illustrator documents as native Illustrator files

Saving Illustrator documents as PDF files

This document can help you optimize the file size of Adobe Illustrator documents that you save as native Illustrator (AI) files or as PDF files. Depending on the options you choose, you can significantly alter the document's file size. These options require special attention in order to optimize file size and performance.

Both file formats can take advantage of the Progressive Graphics Format (PGF) file format. The PGF format defines the transparency information in a file. PGF is necessary because the PDF doesn't recognize transparency information.

For more information on transparency, please see the Transparency Flattening Guide on the Adobe website at www.adobe.com/products/illustrator/pdfs/ai10_print.pdf .

Saving Illustrator documents as native Illustrator files

When you save an Illustrator document as an AI file, consider using the following Illustrator options to optimize file size.

Fonts option

The Fonts option specifies when to embed the entire font (as opposed to just the characters used in the document) based on how many of the font's characters are used in the document. Embedding fonts increases file size because the file will contain more fonts than the document uses. The increase can be significant if, for instance, you embed a font that contains 1,000 characters in a document that uses only 10 of those characters. By default, Illustrator subsets any font that appears less than 100% of the time. Consider using the default settings to control file size. If you want to embed the whole font, set the percentage to 0%.

Create PDF Compatible File option

AI files use both PDF and PGF formats. If you choose the Create PDF Compatible File option, Illustrator creates an accompanying PDF file that is compatible with any application that recognizes PDF files. If you choose this option, the file size increases because you're saving two formats within the Illustrator file.

Include Linked Files option

The Include Linked Files option only refers to the PGF portion of the file. Illustrator automatically embeds linked files when you choose Create PDF Compatible File, regardless of the status of the Include Linked Files option. If you don't want to create a PDF-compatible file, deselect the Create PDF Compatible File option to reduce file size.

Note: Because Illustrator CS includes all linked files by default, file size increases by the size of the linked files. Therefore, a file with little artwork and large linked files could significantly increase in size.

Use Compression option

Because compression reduces file size, make sure you select this option.

Saving Illustrator documents as PDF files

When you save an Illustrator document as a PDF file, consider using the following Illustrator options to optimize file size.

Preserve Illustrator Editing Capabilities option

The Preserve Illustrator Editing Capabilities option prompts Illustrator to add PGF data to the PDF file. If you don't select Preserve Illustrator Editing Capabilities when you save a PDF file, and you then re-open the PDF file in Illustrator; Illustrator flattens the transparency in the file. Choose this option if you want to be able to re-open and edit the PDF file in Illustrator. However, this option counteracts aggressive compression and downsampling and increases the file size.

Optimize for Fast Web View option

The Optimize for Fast Web View option minimizes file size, facilitates page-at-a-time downloading, and replaces repeated images with pointers to the first occurrences of those images. Even if the PDF file isn't going to be viewed on the web, it's still a good idea to use the Optimize for Fast Web View option to reduce file size.

Create Acrobat Layers From Top Level Layers option

This option saves the Illustrator top-level layers as Acrobat layers in the PDF file. This allows users of Adobe Acrobat 6.x or later to generate multiple versions of the document from a single file. For example, if a document will be published in multiple languages, you can place the text for each language in a different layer. Your printer or prepress service provider can then show and hide the layers in Acrobat 6.x or later to generate different versions of the document.

Note: This option is available only when Compatibility is set to Acrobat 6.0 (1.5) or Acrobat 7.0 (1.6).

Compression options

When you save an Illustrator file as a PDF file, you can compress text and line art, and compress and downsample bitmap images. Depending on the settings you choose, compression and downsampling can significantly reduce the size of a PDF file with little or no loss of detail and precision.

The Compression area of the Adobe PDF Options dialog box contains three sections. Each section provides the following options for compressing and resampling color, grayscale, or monochrome images.

-- Compression (Downsampling)

If you plan to use the PDF file on the web, use downsampling to allow for higher compression. If you plan to print the PDF file at high resolution,

don't use downsampling. Deselect the option to disable all downsampling options.

Downsampling refers to decreasing the number of pixels in an image. To downsample color, grayscale, or monochrome images, choose an interpolation method, enter the desired resolution (in pixels per inch), and then enter a resolution in the For Images Above box. Illustrator downsamples all images with resolution above this threshold.

The interpolation method you choose determines how pixels are deleted:

-- Average Downsampling averages the pixels in a sample area and replaces the entire area with the average pixel color at the specified resolution.

-- Bicubic Downsampling uses a weighted average to determine pixel color, which usually yields better results than the simple averaging method of downsampling. Bicubic is the slowest but most precise method, resulting in the smoothest gradations.

-- Subsampling chooses a pixel in the center of the sample area and replaces the entire area with that pixel color. Subsampling significantly reduces the conversion time compared with downsampling, but results in images that are less smooth and continuous.

-- Compression (Compression)

Determines the type of compression used. The Automatic option automatically sets the best possible compression and quality for the artwork contained in the file. For most files, this option produces satisfactory results. Use Automatic (JPEG) if you need the greatest compatibility. Use Automatic (JPEG2000) for superior compression.

ZIP compression works well on images with large areas of single colors or repeating patterns, and for black-and-white images that contain repeating patterns. ZIP compression can be lossless or lossy, depending on the Quality setting.

JPEG compression is suitable for grayscale or color images. JPEG compression is lossy, which means that it removes image data and may reduce image quality; however, it attempts to reduce file size with a minimal loss of information. Because JPEG compression eliminates data, it can achieve much smaller file sizes than ZIP compression.

JPEG2000 is the new international standard for the compression and packaging of image data. Like JPEG compression, JPEG2000 compression is suitable for grayscale or color images. It also provides additional advantages, such as progressive display.

CCITT and Run Length compression are only available for monochrome bitmap images. CCITT (Consultative Committee on International Telegraphy and Telephony) compression is appropriate for black-and-white images and any images scanned with an image depth of 1 bit. Group 4 is a general-purpose method that produces good compression for most monochrome images. Group 3, used by most fax machines, compresses monochrome bitmaps one row at a time. Run Length compression produces the best results for images that contain large areas of solid black or white.

-- Compression (Image Quality)

Determines the amount of compression that is applied. The available options depend on the compression method. For JPEG compression, Illustrator provides Minimum, Low, Medium, High, and Maximum Quality options. For ZIP compression, Illustrator provides 4-bit and 8-bit Quality options. If you use 4-bit ZIP compression with 4-bit images, or 8-bit ZIP compression with 4-bit or 8-bit images, the ZIP method is lossless; that is, data is not removed to reduce file size, so image quality is not affected. Using 4-bit ZIP compression with 8-bit data can affect the quality, however, because data is lost.

Tile Size option

The Title Size option is only enabled when the compression setting is JPEG2000. This option determines the size of the tiles for progressive display.

Compress Text And Line Art option

The Compress Text And Line Art option applies ZIP compression to all text and line art in the file. This option results in no loss of detail or quality.

Fonts option

The Subset Embedded Fonts When Percent Of Characters Used Is Less Than [x] option specifies when to embed the entire font (as opposed to just the characters used in the document) based on how many of the font's characters are used in the document. For instance, if a font contains 1,000 characters but the document only uses 10 of those characters, you may decide that embedding the font isn't worth the extra file size.


Related Documents

326405 Optimize performance of Illustrator (10 and CS on Mac OS X)

320782 Optimizing performance in Illustrator (10 and CS on Windows)

320771 Optimizing Performance (Illustrator 10 on Mac OS 9.x and earlier)

Document 330081
Last edited - 05/05/2005

 

Got Some Time to Take a Survey?

Tell us what you think about this support site.