Breathe life into your videos with colour correction and colour grading.

Even the most advanced cameras can’t compete with the sensitivity and adaptability of the human eye. Learn to use editing software to achieve realistic colours that subtly shift mood and tone.

Side by side comparison of colour corrected video and non-colour corrected video

Why correct colour?

Even if you use the same cameras and lights for every shot of your project, when you get to post-production you might find that your hue, saturation and brightness have changed drastically from one camera set up to the next. Once you’ve cut your footage, you need to even out those values to bring your video colour in line with what your eye perceives.

 

How to do basic correction.

There’s no single right way to correct the colour of your video, but a good place to start is by ensuring that your monitor is calibrated. Once you have an accurate sense of your monitor’s colour profile, you’ll know that the colours you’re choosing are the right ones for a natural look. If you don’t calibrate your monitor, make sure that you look at your video on a few different devices to ensure that it looks good on all of them.

 

When you’re ready to start correcting in Adobe Premiere Pro CC, begin by opening the Colour workspace and clicking the Basic Correction section.

Colour adjusted video of a female surfer compared to the non-adjusted video
Colour correction wheels in a digital video editing programme

Adjust the white balance.

White balance describes the temperature of the whites in your video. If your whites appear tinted blue or yellow, you can adjust them. Because white is a component in all your other colours, this will help your whole picture look more realistic.

 

Director and editor Jonathon Pawlowski suggests holding a white card or paper in front of the camera before every shot. “If you want to colour balance the image, you can use the Eyedropper to click the white card and that will tell the computer, ‘This is white.’ The white balance will adjust and that’s a good place to start.”

 

Another way to adjust the white balance is to use the Temperature and Tint sliders and gauge the effect on the video clip. Move the Temperature slider left to add blue to your whites and right to add orange. Move the Tint slider left to shift the whites toward green and right to shift them toward magenta.

 

Tweak the tones.

Under the Tone heading, you can use sliders to adjust Exposure, Contrast, Highlights, Shadows, Whites, Blacks and Saturation. Skin tone can be the most difficult shade to get right and the easiest to notice when it’s wrong, so pay close attention to the skin tones of your subjects.

 

One helpful way to gauge skin tone is to look at the Lumetri YUV vectorscope, which measures brightness (the Y value) against colour (U and V values). To isolate the skin tone, go to Effect Controls and add a mask. Draw a box around the face of your subject and then check the vectorscope to see how closely the skin tone falls to the line separating magenta from yellow. This line marks the hue of blood under the skin, so whatever the subject’s ethnicity, their skin tone should sit close to that line.

 

Once skin and other midtones look natural, check to make sure your highlights and shadow details aren’t lost. Use the Lumetri Colour waveform scope and histograms to ensure that the values of your tones aren’t clipped or crushed.

Splash screen for introductory video about Lumetri Colour scopes

Learn how to use Lumetri Colour scopes.

In the Lumetri Colour panel, you can find a variety of colour correction tools. Use the Curves controls to make precise adjustments to luminance and individual colour channels. You might add S curves to add depth. There’s also a hue saturation curve control, so you can boost or cut specific hues and colour wheels that allow you to adjust highlights, shadows and midtones separately.

 

After you’ve achieved a colour balance that looks right, you can begin replicating that in other sequences.

 

Professional colorist Gerry Holtz emphasize the value of a light touch: “One of the biggest mistakes a lot of people make is colour correcting too much and having to correct their own problems. If you do a bunch of stuff one way and then you go into Curves and you don’t like the image, you might be trying to take something out that you put in.” If you find yourself in that position, Holtz suggests saving a still image, resetting and then trying to recreate that image with fewer adjustments.

Beautiful photo of a coastline

Watch an example of colour correction at work.

Cinematographer and director Tasha Van Zandt walks you through her process as she slows down and colour corrects a video.

Correcting the video colour in a video editing software

Correct colour efficiently using Colour Match.

Learn how to use the Lumetri Colour panel to match the colour of one clip to a reference frame. When you click Apply Match, Adobe Sensei’s AI analyses the reference frame’s colour values and applies a similar look to the clip. The match might not be perfect, but you can fine-tune in the Basic Correction tab to make sure you get the colour right.

Colour grading tips.

Once you’ve corrected the colour so your video has an even, unified look, you can use colour more artistically. Choose a palette that reflects the mood of each particular section of a piece and experiment with boosting different colours to reflect the emotional tenor. A happy family scene might be done with bright tones of yellow and orange, while another scene in a post-apocalyptic wasteland might be dark and tinted blue.

 

“Colour grading is very similar to mood music,” Holtz says. “You put in dramatic music and the whole scene comes down. You put in the happy music, the whole scene goes up. You can do that same thing in color, but it’s got to be subtle.”

 

Filmmaker and writer David Andrew Stoler cautions against doing too much. “If there’s a major shift in emotional tone or perspective, then you’ll want to change something,” Stoler says. “But you’re working off a basic palette that you laid down in the beginning. If you want to amplify a certain feeling, just do a little shift.”

Editing video clips in a video editor

A glut of LUTs.

LUTs or Lookup Tables, are like filters you can drop into your timeline to establish an instant look or mood in your footage. Premiere Pro comes with several options and you can import third-party LUTs that will give your video the look of a Hollywood blockbuster. “They’re useful tools that can make the whole thing nice and look one specific way,” Stoler says.

 

But don’t drop LUTs into your footage without doing colour correction first. Your eye can determine a natural-looking skin tone and focus the viewer’s eye on a certain part of the image. A LUT can’t do either. “The key is to play with your colour controls and learn what they do and how they affect things,” Stoler says.

 

Holtz stresses the importance of colour correcting before grading and of doing so with delicacy. “If, after you’ve colour corrected, you want to give it a warm tone, do it in a way that it feels warmer without it feeling like it’s yellow all of a sudden. The real trick is finding that balance. For me, it never looks good when it’s got a colour wash over it.”

 

Work with colour in Adobe Premiere Rush.

If you’re shooting and editing video while you travel, you can correct and colour grade your footage on-the-go using Premiere Rush. For basic colour correction, open the Colour panel and adjust intensity, exposure, contrast, highlights, shadows, temperature and more. Try colour grading your footage with preset filters.

 

Whether you’re using Premiere Pro or Premiere Rush, you can correct the colour of your video to make it look natural and realistic and then grade the colour for a moody and cinematic feel. Experiment until you find the looks you want. The more you practice, the more intuitively you’ll know what adjustments to make and when.

You might also be interested in…

Editing a video on a smartphone.

Introduction to video editing.

Learn the principles of video editing and practical tips for both big and small screens.

Unique dynamic range is captured in this sea-level photograph of a coast.

What is dynamic range?

Learn about the dynamic range of your camera and how to manipulate it to create the images you want.

Aerial cityscape establishing shot image.

Set the scene with an establishing shot.

Establishing shots are crucial because they tell us where and often when, the action is happening.

Film grain effect on city skyline picture of Lisbon.

An overview of film grain.

See how this technique can help to bring a stylized and evocative effect to your work.

Get Adobe Premiere Rush

Create and share online videos anywhere.