Stabilize shaky videos in minutes with Adobe Premiere Pro.

See how you can use the video editor to make shaky footage smoother and more watchable in a few simple steps.

A person standing on top of a snowy mountain wearing a helmet with a camera mounted to it

Add professionalism to clips with video stabilizer technology.

When you’re filming a video, especially if you’re zooming in to get a shot, camera shake is inevitable. Even with the use of a Steadicam, every method to try and get clean shots in camera will require some post-production work. When it comes to video stabilization software, Adobe Premiere Pro is a really powerful tool — its Warp Stabilizer effect smooths out unwanted camera shake in just a few clicks, with precision fine-tuning so you can get exactly the look and feel you want. Here’s how you can use this effect to stabilize shaky videos shot on your GoPro, smartphone, drone or handheld camera.

A step-by-step guide to stabilizing video files in Premiere Pro.

step

Step 1: Import your media.

Bring the video clips you want to stabilize into Premiere Pro. You can do this in one of three ways:

 

  • Select File › Import from Media Browser.
  • Right-click the file in the Media Browser and select Import.
  • Drag the file from the Media Browser into the Project panel or drag the file from the Media Browser into a timeline.

 

If you already have an existing sequence, drag the clip you want to stabilize into the Timeline. If not, right-click and select New Sequence from Clip.

step

Step 2: To maintain good performance, split your clip into the smallest working area.

Warp Stabilizer is a memory-intensive and time-consuming operation. While it lets you continue working in Premiere Pro during processing, it will be a little slower. Once Warp Stabilizer completes the stabilizing stage, Premiere Pro returns to the normal state. To help with this, first identify the shaky portion of the footage and then split the clip to isolate those shaky parts. Then, run Warp Stabilizer only on those shortened clips.

 

To split clips, move the playhead to the points in the tracks where you want to make a split. Make sure the channels you want to split are highlighted. If you want to split the audio with the video, make sure the audio track is highlighted too. Splitting and moving the video without the audio may cause your audio to go out of sync elsewhere.

 

If you want to split clips where two or more clips or tracks overlap in a timeline, you’ll need to switch to the Expert View Timeline. Drag a marquee to select clips on different tracks that overlap at a point in time. Then, drag the playhead to the frames where you want to make the split.

 

Use the keyboard shortcut Command/Control + K (for Mac or PC, respectively) or choose Timeline › Split Clip. Now you have two clips from the same file that can be edited independently.

Adobe Premiere Pro warp stabilizer effect menu interface
step

Step 3: Apply the Warp Stabilizer to the shaky clip

First, select the clip you want to stabilize. Then, in the Effects panel, choose Distort › Warp Stabilizer. Next, apply the effect by double-clicking or by dragging the effect to the clip in the Timeline or the Effect Controls panel.

 

After the effect is added, analysis of the clip begins immediately in the background. Remember that, depending on the size of your clip, this can take a while. You can watch the progress of the Stabilizer in the Project panel. As analysis begins, the first of two banners indicates that analysis is occurring. When analysis is complete, the second banner moves along to show that stabilization is happening. You are free to work with the footage or elsewhere in the project while these steps are occurring.

step

Step 4: Adjust the stabilization for the look you want.

Once the Stabilizer has finished working, you can examine your work and make adjustments to ensure the video features everything you need to see in the shot.

 

While the Warp Stabilizer is a smart and powerful tool, you might notice aspects in the stabilized video that you need to tweak. If your clip finishes stabilizing and parts of it look woozy or wobbly, it’s been over-smoothed. You can adjust for that. If the stabilizing caused you to lose some edge material you wanted, you can also adjust the frame to get it back.

 

The Warp Stabilizer does its job by tracking different points in the frame and performing complex counter-movements to the footage. This means your frames might rotate, lift, slide over or lower. Or Warp Stabilizer might zoom in to keep your clip edge to edge in spite of these adjustments. If the result is good, you’re done with stabilization. If you see things that aren’t quite right, here’s what to do:

 

  • Look at the framing.
    Inspect what the Stabilizer is doing by changing the setting to Stabilize Only under the Framing menu. This displays the entire frame, including the moving edges. Stabilize Only shows how much work is being done to stabilize the image. Using Stabilize Only allows you to crop the footage using other methods. (Note: When selected, the Auto-scale section and Crop Less Smooth More property are disabled.

 

  • Tweak smoothing and cropping.
    Under Advanced Settings, reduce either the Smoothness or Crop Less Smooth More function. Crop Less Smooth More is much more responsive, as it doesn’t require a restabilize phase.

 

If those two methods still aren’t enough, you might need to make finer adjustments.

Someone surfing in the ocean

Making fine adjustments to Stabilization.

Gain greater control over the intended stabilization result in your video editing by adjusting Stabilization settings.

 

Start by using the sliders to adjust the degree of stabilization and cropping. You’ll see a tradeoff between cropping and smoothing. Lower smoothing values are closer to the camera’s original motion while higher values are smoother. Values above 100 require more cropping of the image. This can result in two types of footage:

 

  • Smooth motion (default): This retains the original camera movement, but makes it smoother. When selected, Smoothness is enabled to control how smooth the camera movement becomes.

 

  • No motion: This attempts to remove all camera motion from the shot. When selected, the Crop Less Smooth More function is disabled in the Advanced section. This setting mimics the look of having set the camera on a tripod. It will produce artifacts (strange, unwanted effects) if your camera was actually in motion, like filming from a car. Smoothing is disabled with this setting.

 

You can also control the counter movements of the Warp Stabilizer on the frame by adjusting the Method, which uses different tracking to find stability with different degrees of complexity. Each time you make an adjustment, you’ll see that the Stabilization restarts, but the analysis won’t have to. Here are the methods Warp Stabilizer performs on the footage to stabilize it:

 

  • Position: Stabilization is based on position data only and is the most basic way footage can be stabilized.

 

  • Position, scale and rotation: Stabilization is based upon position, scale, and rotation data. If there are not enough areas to track, Warp Stabilizer chooses position.

 

  • Perspective: This uses a type of stabilization where the entire frame is effectively corner-pinned. If there are not enough areas to track, Warp Stabilizer chooses the previous type (Position, Scale, Rotation).

 

  • Subspace Warp (default): This attempts to warp various parts of the frame differently to stabilize the entire frame. If there are not enough areas to track, Warp Stabilizer chooses the previous type (Perspective).

 

The method in use on any given frame can change across the course of the clip based on the tracking accuracy. Running this edit may take a while.

 

Lastly, you can control how the edges of the stabilized results appear in the Framing. You have less freedom here than with the other controls, depending on the clip. If you select stabilizing that addresses the edges but isn’t related to the rest of the camera movement, you’ll get black artifacts visible in your clip. The default setting here is Stabilize, Crop, Auto-scale. This crops the moving edges and scales up the image to refill the frame. The automatic scaling is controlled by various properties in the Auto-scale section.

 

Once your clip is ready, you can move on to the next or finish your project and export it. Warp Stabilizer quickly allows you — in a few ways — to find a solution to shaky video footage while preserving some intentional camera movement to keep things natural. It’s what makes Adobe Premiere Pro a great video stabilization software. No matter how you shoot, you can get after it and then, in post, play around with the settings and sliders until you get the look and feel you want, edge to edge.

You might also be interested in…

Unique dynamic range is captured in this sea-level photograph of a coast.

What is dynamic range?

Learn about the dynamic range of your camera and how to manipulate it to create the images you want.

Colorful digital video effects

Experimenting with popular video effects.

Dive into popular post-production effects and explore the moods and styles each can achieve.

On a film set with a green screen and lighting fixtures

How to use a green screen.

Learn to light and shoot green screen footage, and use a chroma key, to add new backgrounds.

A colorimeter being used to calibrate a monitor.

Calibrate your monitor to give your video the best possible color.
Learn how to manage your monitor’s color settings so your video stays true to your vision.

Get Adobe Premiere Pro

Create flawless productions with the industry-leading video editing software.

7 days free, then NIS 74.00/mo.